SEARCH FOR YOUR PRODUCT
Brand: C.OEFT
OE numbers: 09G919823
Product Name: Gear Shift Switch Shift Switch
Compatible model:
Product status:Remanufactured
Product weight: 0.719KG
Packaging size: 17X17X8.5 cm
Product packaging: Neutral Packaging
Car Series: Germany
Car Type: for Audi Volkswagen and Skoda
1. Gear Position Detection and Digital Signal Conversion
As the core link between driver input and transmission control, the switch:
Uses a magnetic sensor to accurately detect lever positions (P/R/N/D/3/2/L) with sub-millimeter precision.
Converts mechanical lever movement into encrypted digital signals (compatible with Volkswagen’s CAN-LIN communication protocol) and transmits them to the TCU. For example:
Selecting “L” (Low) sends a signal to the TCU to engage lower gears, increasing engine braking for downhill descents.
Shifting to “3” limits the transmission to the first three gears, optimizing torque for towing or off-road driving.
2. TCU and ECM Coordination
The switch’s signals enable seamless synchronization between Volkswagen’s TCU and Engine Control Module (ECM):
Transmits gear position data to the ECM, which adjusts fuel injection and ignition timing to match the selected gear. For instance, in “D” mode, the ECM reduces idle speed to improve fuel efficiency; in “L” mode, it maintains higher RPM to deliver maximum torque.
Collaborates with the TCU to implement adaptive shift logic—learning the driver’s driving style (e.g., aggressive vs. economical) and adjusting shift points accordingly. The switch’s position data validates gear changes, ensuring smooth transitions between gears.
3. Dashboard Indicator and Warning Light Control
Sends gear position signals to the instrument cluster, illuminating corresponding LED indicators (e.g., “P,” “R,” “D”) for clear driver feedback. This ensures the driver is always aware of the current gear, reducing operational errors.
Triggers the “Transmission Malfunction” warning light on the dashboard if a signal mismatch is detected (e.g., switch position conflicts with TCU data). This alerts the driver to potential issues like sensor failure or wiring faults, prompting timely maintenance.
4. Shift Lock and Safety Interlock Operation
Activates the shift lock solenoid to secure the lever in “P” when the vehicle is turned off or the brake pedal is not pressed. When the brake is depressed, the switch sends a signal to disengage the solenoid, allowing the lever to be moved to other positions.
Integrates with the ignition system to interrupt starter power if the lever is not in “P” or “N.” This prevents the engine from starting in gear, a critical safety measure to avoid accidents during startup.
5. OBD-II Compliant Fault Diagnostics
The switch features built-in self-diagnostic capabilities, continuously monitoring sensor integrity, signal stability, and circuit connectivity. If anomalies are detected (e.g., open circuits, sensor drift), it logs standardized OBD-II trouble codes (e.g., P0804 for park/neutral switch circuit range/performance) and transmits them to the TCU. Mechanics can retrieve these codes using Volkswagen’s VAG-COM diagnostic tool, enabling quick troubleshooting and minimizing vehicle downtime.
1. OEM-Matched Compatibility for Volkswagen 09G Transmissions
The Gear Shift Switch 09G919823 is specifically engineered as a direct replacement for Volkswagen vehicles equipped with the 09G 6-speed automatic transmission—including popular models like the Volkswagen Golf, Jetta, Passat, and Tiguan, as well as Audi A3 and Skoda Octavia. It strictly adheres to Volkswagen Group’s OE specifications, matching the original switch’s pin layout, mounting dimensions, and CAN bus communication protocol. This eliminates common aftermarket issues such as signal asynchrony or connector mismatches, enabling plug-and-play installation without modifying the vehicle’s wiring harness or transmission control unit (TCU) settings. For repair technicians and vehicle owners, this compatibility ensures seamless integration with the vehicle’s powertrain system.
2. Durable Build for Long-Term Reliability
Housing: Constructed from heat-resistant PBT-GF30 plastic (30% glass fiber reinforced), the switch withstands extreme temperatures ranging from -35°C to 140°C—ideal for enduring the high heat of the engine compartment and cold winter conditions. It also resists mechanical impact and vibration (up to 35g), a key requirement for vehicles operating on rough roads.
Internal Components: Adopts gold-plated copper contacts, which reduce electrical resistance by 40% compared to standard brass contacts and resist oxidation even after 200,000+ shift cycles. The integrated non-contact Hall-effect sensor replaces traditional mechanical contacts, eliminating wear from friction and extending the switch’s service life by 60% over conventional designs.
Sealing Performance: Features an IP67-rated enclosure, providing complete protection against dust ingress and temporary submersion in water (up to 1 meter for 30 minutes). This shields internal electronics from road salt, engine oil, and moisture, making it reliable for vehicles in coastal or snowy regions.
3. High-Precision Signal Transmission for Smooth Shifting
Equipped with a 16-bit magnetic position sensor, the 09G919823 detects gear lever movements with 0.3mm accuracy and transmits digital signals to the Volkswagen TCU in ≤15ms. This ultra-fast response eliminates signal lag, preventing issues like delayed gear engagement or incorrect gear recognition. For example, when shifting from “D” (Drive) to “R” (Reverse) in tight parking spaces, the switch’s precise signal ensures the TCU engages reverse gear instantly, avoiding hesitation or gear clash.
4. Safety-Certified Design
Compliant with Volkswagen’s strict safety standards (ISO 16750 and FMVSS 102) and integrated with dual safety mechanisms:
Park/Neutral Safety Interlock: Blocks engine cranking unless the lever is in “P” (Park) or “N” (Neutral), preventing accidental vehicle movement if the lever is left in “D” or “R.”
Shift Lock Control: Works in tandem with the brake pedal switch to lock the lever in “P” until the brake is depressed. This reduces rollaway risks when parking on slopes, a critical safety feature for urban and mountainous driving.
Both mechanisms undergo 15,000+ simulated misuse tests (e.g., forced shifting without braking) to ensure fail-safe operation under extreme conditions.
5. Cost-Effective OE Alternative
Offering OE-level performance at 30-35% lower than genuine Volkswagen OEM switches, the 09G919823 delivers exceptional value. Its long Mean Time Between Failures (MTBF ≥10,000 hours) minimizes replacement frequency, lowering maintenance costs for fleet operators and individual owners. Additionally, its modular design allows for easy replacement of faulty sensors without replacing the entire switch, further reducing repair expenses.
6. Ergonomic and User-Friendly Design
The switch’s lever features a soft-touch rubber grip with anti-slip 纹理，ensuring comfortable operation even with gloved hands—ideal for drivers in cold climates. The detent mechanism provides consistent tactile feedback (2.0-2.5N resistance) during shifting, reducing driver fatigue on long trips. Its compact design fits seamlessly into Volkswagen’s dashboard and center console layouts, preserving the vehicle’s interior aesthetics.
INQUIRE NOW 
