SEARCH FOR YOUR PRODUCT
Brand: C.OEFT
OE numbers: 1500000CDB108
Product Name: Clutch Actuator Assembly
Compatible model:1500000CDB108
Product status:Remanufactured
Product weight: 120.000KG
Packaging size:100X100X100 cm
Product packaging: Neutral Packaging
Car Series: Chinese
Car Type: for Haval H6
1. Clutch Engagement & Disengagement Control
As the core component of Haval H6’s DCT system, the actuator receives electrical signals from the TCU to control clutch operation. When the TCU commands a gear shift, the actuator’s DC motor drives the worm gear and rack, which actuates a hydraulic piston to engage or disengage the clutch. For example, during an upshift from 2nd to 3rd gear, the actuator disengages the odd-numbered clutch (1st/3rd/5th/7th) and engages the even-numbered clutch (2nd/4th/6th) in sequence, enabling seamless gear changes.
2. Real-Time Position Feedback
The integrated linear Hall effect sensor continuously monitors the actuator’s piston position and transmits data (voltage signal: 0.5-4.5V) to the TCU. This feedback allows the TCU to adjust the actuator’s motor output, ensuring precise clutch travel (45mm ±0.5mm) and preventing over-engagement (which causes clutch drag) or under-engagement (which causes slippage). The sensor’s high resolution ensures consistent shift quality across all driving conditions.
3. Hydraulic Pressure Regulation
The actuator’s solenoid valve regulates hydraulic fluid pressure (3-8 bar) to the clutch cylinder, adapting to driving demands. During gentle acceleration, it reduces pressure for smooth clutch engagement; during aggressive acceleration, it increases pressure for rapid, firm engagement. The built-in pressure sensor monitors fluid pressure in real time, sending data to the TCU to prevent pressure anomalies that could damage the clutch.
4. TCU Communication & Adaptive Learning
The actuator establishes two-way communication with Haval H6’s TCU via a 3-pin connector. It receives shift commands (PWM signal) and transmits status data (position, pressure, motor current). The TCU uses this data to implement adaptive learning algorithms—adjusting actuator response time and clutch engagement force based on driver habits (e.g., aggressive vs. gentle acceleration) and clutch wear, ensuring consistent performance over time.
5. Fault Detection & Protection
The actuator is equipped with built-in diagnostic functions to detect abnormalities such as motor overload, sensor failure, or solenoid short circuits. If a fault is detected, it transmits a fault code to the TCU (e.g., P0900 for actuator circuit malfunction), which illuminates the transmission warning light on the dashboard. The TCU may also activate a protective mode (e.g., limiting to 3rd gear) to prevent further damage to the DCT system.
6. Synchronization with DCT Gear Shifting
The actuator works in tandem with Haval H6’s DCT to coordinate clutch operation and gear selection. During gear changes, it synchronizes clutch engagement/disengagement with the movement of the DCT’s shift forks—ensuring that the new gear is fully engaged before the clutch is released, eliminating gear grinding and power interruption. This synchronization is critical for the smooth, quick shifts characteristic of Haval H6’s DCT system.
1. Haval H6-Specific OE-Precision Compatibility
The Clutch Actuator Assy 1500000CDB108 is exclusively engineered as a direct replacement for Haval H6 models—specifically targeting third-generation (2020-present) variants equipped with 7-speed wet dual-clutch transmissions (DCT). It adheres strictly to Haval’s OE standards, matching critical parameters with ultra-high precision: 3-pin electrical connector configuration, mounting hole spacing (±0.05mm tolerance), actuator stroke length (45mm), and torque output (12 Nm)—ensuring seamless integration with Haval H6’s Transmission Control Unit (TCU) and DCT clutch system. This dedicated compatibility eliminates aftermarket issues such as shifting asynchrony, clutch slippage, or TCU communication failures, requiring no modifications during installation.
2. High-Quality Refabrication for Reliable Performance
As a professionally refabricated component, the 1500000CDB108 undergoes a rigorous 7-step renovation process: full disassembly, comprehensive component inspection (motor winding continuity, sensor accuracy, hydraulic valve leakage), replacement of worn parts (brushed DC motor, O-rings, position sensors), precision cleaning (ultrasonic degreasing), reassembly with OE-matching components, function calibration (stroke and response time tuning), and 2-hour load testing. All refabricated parts meet or exceed Haval’s OE specifications, ensuring performance comparable to new OEM actuators—with the added benefit of cost-effectiveness.
3. Durable Construction for DCT Demands
Drive System: Equipped with a high-torque brushed DC motor (12V, 300W) with copper-clad aluminum windings, delivering consistent power for clutch engagement/disengagement even under frequent shifting. The motor’s commutator features a gold-plated surface to reduce wear and electrical resistance.
Transmission Mechanism: Uses a hardened steel worm gear and plastic rack (POM material) for smooth force transmission, with a wear resistance rating 20% higher than generic actuators. The gear set is lubricated with high-temperature grease (operating range: -40°C to 150°C) to minimize friction.
Hydraulic Control: Integrates a precision solenoid valve (response time ≤50ms) and pressure sensor (accuracy ±0.2 bar) to regulate hydraulic fluid flow, ensuring stable clutch operation under varying loads.
4. Optimized Response & Shift Smoothness
The refabricated actuator features a calibrated position sensor (linear Hall effect type) with a resolution of 0.1mm, enabling real-time feedback to the TCU for precise clutch control. Its response time is reduced to ≤180ms—15% faster than worn original actuators—eliminating shift lag during rapid acceleration. The integrated hydraulic damping system softens clutch engagement/disengagement, reducing shift shock by 25% and enhancing driving comfort for Haval H6 passengers.
5. Cost-Effective & Maintenance-Friendly
Offering OE-level performance at 40-50% lower than genuine Haval OEM actuators, the 1500000CDB108 provides exceptional value for Haval H6 owners and repair shops. Its modular design allows easy replacement of individual components (e.g., motor, sensor) without replacing the entire assembly, cutting maintenance costs. The actuator comes with a 12-month/20,000-kilometer warranty, covering refabrication defects. Additionally, it is compatible with Haval’s standard DCT fluid (LV 75W), eliminating the need for specialized lubricants.
6. Wide Temperature Adaptability
The 1500000CDB108 is engineered to perform reliably in extreme climates. Its electronic components (motor, sensor, solenoid) are sealed to IP67 standards, protecting against dust and water ingress. The actuator maintains stable operation across a temperature range of -40°C (cold northern regions) to 150°C (high-temperature DCT environments), making it suitable for diverse driving conditions.
INQUIRE NOW 
