SEARCH FOR YOUR PRODUCT
Brand: C.OEFT
OE numbers: 42700-39050
Product Name: Gear Shift Switch Shift Switch
Compatible model:
Product status:Remanufactured
Product weight: 0.640KG
Packaging size: 17X17X8.5 cm
Product packaging: Neutral Packaging
Car Series: Korean
Car Type: for Hyundai Kia
1. Precision Gear Position Detection & High-Speed Signal Conversion
As the core interface for premium transmission control, the switch:
Uses dual Hall-effect sensors to detect lever positions (P/R/N/D/S/L/M) with sub-millimeter precision, ensuring redundant signal validation.
Converts mechanical movement into encrypted CAN-FD signals (compatible with Hyundai-Kia’s premium powertrain protocol) and transmits them to the TCU. For example:
Selecting “M” (Manual) mode sends a signal to activate paddle shifters, allowing driver-controlled upshifts/downshifts with 100ms response time.
Engaging “L” (Low) mode triggers the TCU to lock into lower gears, maximizing engine braking for downhill towing (up to 5,000 lbs).
2. Synchronization with Premium Powertrain Systems
The switch’s signals enable seamless coordination between Hyundai-Kia’s 8-speed TCU, ECM, and chassis control module (CCM):
Transmits gear position data to the ECM, which adjusts fuel injection, ignition timing, and turbo boost pressure to match the selected gear. In “S” mode, the ECM increases turbo boost by 15% for enhanced performance; in “Eco” mode (integrated with switch signals), it reduces fuel delivery by 8% for efficiency.
Collaborates with the CCM to adjust suspension damping during gear changes—e.g., stiffening dampers in “S” mode to minimize body roll during rapid shifts.
3. Luxury Dashboard & Infotainment Integration
Sends gear position signals to the digital instrument cluster and head-up display (HUD), projecting crisp “P/R/N/D/S” indicators in the driver’s line of sight.
Triggers the infotainment system to display shift recommendations (e.g., “Shift to 6th for Economy”) based on vehicle speed and load, enhancing driver awareness.
Activates the “Transmission Protection” warning on the cluster and HUD if signal anomalies are detected, alerting the driver to potential issues.
4. Smart Shift Lock & Safety Interlock Operation
Activates the electronic shift lock solenoid to secure the lever in “P” when the vehicle is off or the brake pedal is not pressed. It unlocks only after verifying brake pressure (≥150 psi) and gear position via dual sensors.
Integrates with the vehicle’s keyless entry system—preventing gear shifts if the key fob is outside the vehicle, adding an extra layer of security.
5. Advanced OBD-II Diagnostics for Premium Service
The switch features built-in predictive diagnostics, continuously monitoring sensor performance and signal stability. It logs OBD-II trouble codes (e.g., P0851 for park/neutral switch circuit malfunction) and transmits real-time data to Hyundai-Kia’s telematics system (Blue Link/UVO). This allows remote diagnostics by authorized service centers, enabling proactive maintenance alerts (e.g., “Sensor degradation detected—service recommended in 500 miles”) and minimizing unexpected breakdowns.
1. OE-Certified Compatibility for Hyundai & Kia Premium Models
The Gear Shift Switch 42700-39050 is exclusively engineered for Hyundai and Kia premium models equipped with 8-speed automatic transmissions, including Hyundai Palisade, Genesis G80, Kia Telluride, and K900. It adheres strictly to Hyundai-Kia Group’s OE certification standards, matching the original switch’s precision-machined mounting brackets, 16-pin electrical connector layout, and CAN-FD high-speed communication protocol. This eliminates compatibility risks like signal dropout or TCU miscommunication common in non-OE alternatives, enabling plug-and-play installation without modifying the vehicle’s powertrain wiring or control software. For luxury vehicle owners and authorized repair centers, this compatibility ensures seamless integration with the vehicle’s advanced transmission system.
2. Heavy-Duty Construction for Premium Durability
Housing: Crafted from carbon-fiber reinforced PPS (Polyphenylene Sulfide) plastic, the switch withstands extreme temperature fluctuations (-45°C to 140°C)—resisting thermal deformation in engine compartments and brittleness in sub-zero environments. It also endures high-frequency vibration (up to 40g) from rough terrain, a key requirement for full-size SUVs like Palisade and Telluride.
Internal Components: Features gold-plated beryllium copper contacts, which reduce electrical resistance by 50% compared to silver-plated alternatives and maintain conductivity even after 250,000+ shift cycles. The integrated dual Hall-effect sensors (primary and backup) replace mechanical contacts, eliminating wear and ensuring fail-safe signal transmission.
Sealing Performance: Boasts an IP6K9K-rated enclosure, certified to resist high-pressure steam cleaning (80-100 bar) and prolonged exposure to road salt, engine oil, and humidity. This makes it ideal for vehicles in coastal areas, snowy regions, or off-road driving scenarios.
3. Ultra-Precise Signal Transmission for Luxury-Grade Shifting
Equipped with a 24-bit magnetic position sensor, the 42700-39050 detects gear lever movements with 0.1mm accuracy and transmits high-speed digital signals to the TCU in ≤10ms. This near-instant response eliminates shift lag, ensuring seamless gear engagement—critical for the smooth driving experience expected in premium models. For example, when shifting from “D” (Drive) to “S” (Sport) during highway acceleration, the switch’s precise signal triggers the TCU to adjust shift points within 50ms, delivering immediate power without hesitation.
4. Advanced Safety Mechanisms for Premium Protection
Compliant with Hyundai-Kia’s luxury safety standards (ISO 26262 ASIL-B and FMVSS 102) and integrated with triple safety features:
Dual Park/Neutral Safety Interlock: Primary and backup sensors cross-verify gear position before enabling engine cranking, preventing accidental startup in “D” or “R.”
Smart Shift Lock: Uses biometric feedback (via the brake pedal pressure sensor) to unlock the lever only when firm brake pressure is applied, reducing rollaway risks on steep slopes.
Overcurrent Protection: Built-in thermal fuses and surge suppressors shield the switch and vehicle wiring from electrical overloads, a critical feature for vehicles with advanced electrical systems.
All safety mechanisms undergo 20,000+ simulated misuse tests (e.g., forced shifting, electrical surges) to ensure reliability in extreme conditions.
5. Cost-Effective Premium Replacement
Offering OE-level performance at 35-40% lower than genuine Hyundai-Kia luxury OEM switches, the 42700-39050 delivers exceptional value. Its long Mean Time Between Failures (MTBF ≥12,000 hours) minimizes replacement frequency, lowering maintenance costs for luxury vehicle owners. The modular sensor design also allows for targeted repairs (instead of full switch replacement), further reducing service expenses.
6. Luxury-Oriented Ergonomic Design
The switch’s lever features a leather-wrapped grip with contrast stitching, matching the interior aesthetics of Genesis and Kia luxury models. The detent mechanism provides customizable tactile feedback (1.8-2.2N resistance) via adjustable springs, catering to different driver preferences. Its low-profile design fits seamlessly into floating center consoles, preserving the vehicle’s premium interior layout.
INQUIRE NOW 
